Independent guide, not a government website. Water Operator Hub is not affiliated with any state agency or certification board. Rules and fees change; always confirm with your state's program (we link the official page on every state guide).

Flow, velocity & filter rates

Flow problems connect pipe size, water speed and flow rate. Filter problems are rates "per square foot" of filter surface. Both mostly come down to dividing by an area.

In plain English

Flow (Q) is how much water passes per unit of time. It equals the pipe's cross-sectional area times how fast the water moves. The filter loading rate is the flow through a filter divided by the filter's surface area. The backwash rate is the same idea for backwash flow. The rise rate is how fast the water level climbs during backwash.

Q (ft³/sec) = Area (ft²) × Velocity (ft/sec) Velocity (ft/sec) = Q (ft³/sec) ÷ Area (ft²) 1 ft³/sec = 7.48 gal × 60 sec = 448.8 gpm Filtration rate (gpm/ft²) = Flow (gpm) ÷ Filter surface area (ft²) Backwash rate (gpm/ft²) = Backwash flow (gpm) ÷ Filter area (ft²) Rise rate (in/min) = Backwash rate (gpm/ft²) ÷ 7.48 × 12 Backwash water (gal) = Backwash flow (gpm) × Time (min)

Worked example 1: flow in a pipe

Water moves at 3 ft/sec through a full 12-inch pipe. What is the flow in cfs, gpm and MGD?

  1. Area: 12 in = 1 ft → 0.785 × 1² = 0.785 ft²
  2. Q: 0.785 × 3 = 2.355 ft³/sec
  3. gpm: 2.355 × 7.48 × 60 = 1,057 gpm
  4. MGD: 1,057 × 1,440 ÷ 1,000,000 = 1.52 MGD

Worked example 2: filter and backwash

A filter is 20 ft × 25 ft and filters 1,500 gpm. Backwash is 7,500 gpm for 10 minutes. Find the filtration rate, backwash rate, rise rate and backwash volume.

  1. Area: 20 × 25 = 500 ft²
  2. Filtration rate: 1,500 ÷ 500 = 3.0 gpm/ft²
  3. Backwash rate: 7,500 ÷ 500 = 15 gpm/ft²
  4. Rise rate: 15 ÷ 7.48 × 12 = 24.1 in/min
  5. Backwash volume: 7,500 × 10 = 75,000 gal

Practice problems

1. 1,500 gpm flows through a 10-inch pipe. What is the velocity?

Q: 1,500 ÷ 448.8 = 3.342 cfs. Area: 0.785 × (10/12)² = 0.545 ft². V: 3.342 ÷ 0.545 = 6.13 → about 6.13 ft/sec

2. A 15 ft × 30 ft filter receives 1,125 gpm. What is the filtration rate?

1,125 ÷ 450 = 2.5 gpm/ft²

3. The same 450 ft² filter backwashes at 18 gpm/ft² for 8 minutes. Backwash flow and volume?

Flow: 18 × 450 = 8,100 gpm. Volume: 8,100 × 8 = 64,800 gallons

4. 0.8 cfs flows through a 6-inch pipe. Velocity?

Area: 0.785 × 0.5² = 0.196 ft². 0.8 ÷ 0.196 = 4.08 → about 4.08 ft/sec

Formula sources

The formulas on this page match these published exam formula sheets: NC DEQ, Basic Water Treatment Math Formulas (surface & well); Ohio EPA, Applied Wastewater Math Formula Sheet; Florida DEP, Wastewater Treatment Formulas/Conversion Table; WPI (formerly ABC) formula/conversion tables. Use the sheet your own exam provides on test day; layouts and rounding vary. Every number in the examples was recalculated with a script before publishing. These are study examples, not operating guidance.