Chlorine dose, demand & residual
Chlorine questions show up on almost every water exam and many wastewater exams. They rest on one relationship plus the pounds formula.
In plain English
The dose is how much chlorine you add. Some of it is used up reacting with things in the water; that is the demand. What's left over and measurable is the residual. So what you add equals what gets used plus what's left.
Worked example 1
The dose is 3.2 mg/L and the residual after contact is 0.6 mg/L. What is the chlorine demand?
- Demand = Dose − Residual
3.2 − 0.6 = 2.6 mg/L
Worked example 2: from the chlorinator setting
A chlorinator feeds 75 lbs/day into 4.0 MGD. The residual is 0.5 mg/L. What are the dose and the demand?
- Rearrange the pounds formula for dose:
mg/L = lbs/day ÷ (MGD × 8.34) 4.0 × 8.34 = 33.3675 ÷ 33.36 = 2.248→ dose ≈ 2.25 mg/L- Demand:
2.248 − 0.5 = 1.748→ ≈ 1.75 mg/L
Practice problems
1. Demand is 1.8 mg/L and you want a 0.7 mg/L residual. What dose do you need, and how many lbs/day at 2.0 MGD?
Dose: 1.8 + 0.7 = 2.5 mg/L. Feed: 2.0 × 2.5 × 8.34 = 41.7 → 2.5 mg/L; 41.7 lbs/day
2. The dose is 2.8 mg/L and the demand is 2.1 mg/L. What is the residual?
2.8 − 2.1 = 0.7 mg/L
3. You need 25 lbs/day of available chlorine using 65% HTH. How many lbs/day of HTH?
25 ÷ 0.65 = 38.46 → about 38.5 lbs/day
Check with the chlorine calculator. Related: the pounds formula.
Formula sources
The formulas on this page match these published exam formula sheets: NC DEQ, Basic Water Treatment Math Formulas (surface & well); Ohio EPA, Applied Wastewater Math Formula Sheet; Florida DEP, Wastewater Treatment Formulas/Conversion Table; WPI (formerly ABC) formula/conversion tables. Use the sheet your own exam provides on test day; layouts and rounding vary. Every number in the examples was recalculated with a script before publishing. These are study examples, not operating guidance.