Independent guide, not a government website. Water Operator Hub is not affiliated with any state agency or certification board. Rules and fees change; always confirm with your state's program (we link the official page on every state guide).

Unit conversions & the pounds formula

The "pounds formula" turns a concentration (mg/L) and a flow (MGD) into a weight per day. You will use it for chemical feed, chlorine, BOD and solids loading. If you learn one formula, learn this one.

In plain English

A gallon of water weighs 8.34 pounds. One mg/L means one part per million by weight. So a million gallons at 1 mg/L contains 8.34 lbs of the substance. Multiply by however many million gallons you treat each day and by however many mg/L you want.

Pounds/day = Flow (MGD) × Dose (mg/L) × 8.34 lbs/gal Dose (mg/L) = Pounds/day ÷ (Flow (MGD) × 8.34) Product needed (lbs/day) = Pounds/day of pure chemical ÷ purity (as a decimal)

Key unit conversions

Worked example

A plant treats 1.8 MGD and wants a chlorine dose of 2.5 mg/L. How many pounds of chlorine per day? If it uses 65% calcium hypochlorite (HTH), how many pounds of HTH?

  1. Write the formula: lbs/day = MGD × mg/L × 8.34
  2. Plug in: 1.8 × 2.5 × 8.34
  3. 1.8 × 2.5 = 4.5
  4. 4.5 × 8.34 = 37.53 lbs/day of chlorine
  5. HTH is only 65% chlorine: 37.53 ÷ 0.65 = 57.7 lbs/day of HTH

Answer: 37.53 lbs/day chlorine, or about 57.7 lbs/day of 65% HTH.

Practice problems

1. How many lbs/day of chlorine are needed to dose 0.75 MGD at 3.0 mg/L?

0.75 × 3.0 × 8.34 = 18.765 → about 18.8 lbs/day

2. A chlorinator feeds 50 lbs/day into a flow of 2.4 MGD. What is the dose in mg/L?

50 ÷ (2.4 × 8.34) = 50 ÷ 20.016 = 2.498 → about 2.5 mg/L

3. A pump runs at 1,250 gpm all day. What is the flow in MGD?

1,250 × 1,440 = 1,800,000 gal/day ÷ 1,000,000 = 1.8 MGD

4. You need 3 mg/L at 0.5 MGD using 65% HTH. How many lbs/day of HTH?

0.5 × 3 × 8.34 = 12.51 lbs/day ÷ 0.65 = 19.25 → about 19.2 lbs/day of HTH

Check yourself with the pounds formula calculator. Next: chlorine dose, demand & residual.

Formula sources

The formulas on this page match these published exam formula sheets: NC DEQ, Basic Water Treatment Math Formulas (surface & well); Ohio EPA, Applied Wastewater Math Formula Sheet; Florida DEP, Wastewater Treatment Formulas/Conversion Table; WPI (formerly ABC) formula/conversion tables. Use the sheet your own exam provides on test day; layouts and rounding vary. Every number in the examples was recalculated with a script before publishing. These are study examples, not operating guidance.